Browse Client Types

Browse past lab clients by general industry sectors

Client # Project # In Progress Implementation Tech Transfer Analysis Test Objective
50 1 To determine if there is a better cleaning agent than HCl, nitric acid, or solvents currently used
63 1 Want to know if any of their products have been successfully used in the SCL.
83 1 To evaluate products.
87 1 Want an update on the usage of products for testing in the SCL
91 1 Want an update on the usage of products for testing in the SCL
93 1 Want an update on the usage of products for testing in the SCL
111 1 To evaluate products.
113 1 To evaluate supplied products according to technical datasheets.
125 1 Request for data based on any recent, 199???, studies that show the status of industry shift from CFCs to alternate chemistries?
130 1 To compare new and old formulation
135 1 To evaluate cleaning effectiveness for several contaminant types using client supplied samples.
138 1 To obtain testing results from samples supplied to SCL for evaluation
144 1 To evaluate effectiveness of supplied cleaners
148 1 To compare cleaning efficiency of similar products from two manufactures.
185 1 To evaluate new cleaning product on four contaminants
190 1 Comparison of client products with other vendor products
202 1 To evaluate client supplied cleaner for janitorial cleaning
221 1 To evaluate selected products for effectiveness in janitorial cleaning applications.
232 1 To evaluate supplied product for dishwashing and carpet cleaning
241 1 Interest in characterizing a new bio-polymer which has unique surface protection & wetting properties for general purpose consumer cleaners (soaps, detergents, surface protection). Specific attributes/characteristics of the material are: Very uniform spr
256 1 Tropical Products in Salem, MA has been approved by Stepan as a second source to manufacture/fill Enviro Care Corp Moldex RTU and Concentrate disinfectants. Need a support proposal and cost for probably 6 hour of assistance.
257 1 To evaluate performance of supplied products for janitorial applications
258 1 To evaluate supplied products for janitorial cleaning applications.
275 1 To evaluate products for performance in janitorial cleaning applications
275 2 Performance testing for Green Seal certification
275 3 To conduct GS 34 evaluation and flash point on supplied product
275 4 To evaluate supplied product for bathroom cleaning as compared to an industry standard product.
279 1 We have 3 hand soaps and one national brand that we would like to test. If you have an additional national brand that you might want to suggest to show equivalence or superiority of our product. Our product is a self-foaming hand soap and we will be comparing with similar product
279 2 We would like to start the glass cleaner moving forward, if possible. We will look at testing 4 products ( 2 benchmarks, 2 internal products). Would you send us an invoice to get us started?
279 3 We would like to conduct the dish washing evaluation. Could you please get an invoice for submitting 2 samples. How much sample will you need for dish washing? Do you need our final packaging for both dish and glass?
279 4 I would like to submit a new benchmark to evaluate our Replenish product against. Please let me know if you need additional samples of the Replenish foaming dish. How much of the benchmark do you need? Do you have a submission form you would like me to send?
279 5 I’m a chemist at Vi-Jon and getting ready to submit some of our hand soap products for DfE approval. I understand that as part of the review process we need to conduct performance testing on our products and hence, I’m reaching out to you. Wondering if you run this kind of test.
279 6 We are getting ready to send you two sets (vi-jon brand) of hand soaps for performance testing. Could you please provide us with the quote and an estimated date for the test results?
279 7 As we discussed on phone, I am working on couple of formulas for safer choice. Can you please provide me price quote and necessary documents which I need to send along with the product for testing. Have a quick question for you: The 2 formulas on which I am working on are exactly same except with the additives like color and fragrance which will not impact the performance of the product. So can I submit only one formula and can use same report for other formula while submitting it to be reviewed by Tox Services. Please advise. Looking forward to work with you.
279 8 Testing presoak diswh washing products for efficacy
285 1 We have a new product that is designed for use in the direct release market. We need to test as part of our EPA DfE requirement. We would like to have the product compared with a comparative product for all purpose and/or degreasing applications.
285 2 We are going to be using your services to test our new boat soap. I thought we would get the process started by having both parties sign an NDA similar to the one the University sent to me last year, as we don’t want our results published.
285 3 We would like to have a couple of products tested for boat cleaning. One is a general boat cleaner. The second is a hull cleaner.
289 1 Evaluate Z BioScience's product for cleaning performance and microbial mitigation on surfaces using ATP readings.
289 2 Our goal is to screen our product for the best use (or multiple uses). What I want to make sure that we can get out at the end of this project is a clear understanding of what it excels at doing and a preliminary EHS analysis. We would like your input on the safety of our product.
290 1 I was recommended by Adam from UL that your laboratory can do some testing for me. We have a cleaning product that needs to be certified by using testing method listed in UL 2796. Please let me know if your lab do these testing or not, if yes, may you please send me a quote.
291 1 To find scientific statistics as to how well my general all purpose cleaner works. Would like to have it tested for all purpose, bathroom, glass and grease cleaning.
292 1 We have to certify some of our products to the Ecologo and we have to do a performance test. Ecologo gave me the reference of your laboratory for the ASTM E679 test. Products shall demonstrate their ability to control odors in accordance with one of the following test procedures: Odor control products must perform as well as at least two conventional, functionally equivalent products that are available in North America when tested against Standard Guide for Assessing the Efficacy of Air Care Products in Reducing Sensorily Perceived Indoor Air Malodor Intensity, ASTM E1593, or Standard Practice for Determination of Odor and Taste Thresholds by a Forced-Choice Ascending Concentration Series Method of Limits, ASTM E679. For biologically based odor control products, a real-life source of malodor must be used instead of synthetic malodors as samples and testing should follow any application and time requirements stated on the product label to allow time for the microbial components to react.
296 1 I need to arrange for testing of our Odor Control product vs 2 other products using the ASTM 1593 method. We need these test results to help us comply with the UL Ecologo certification requirements. Are you able to assist in this? Please let me know what
300 1 To evaluate products for effectiveness based on Green Seal GS 37 standard
301 1 To evaluate cleaning kit for do-it-yourself formulations
302 1 To evaluate product for Green Seal certification for GS 34.
305 1 To evaluate the performance of cleaning product for GS 37 certification.
306 1 To evaluate supplied products for compliance with Green Seal GS 8 and 37.
309 1 To evaluate the performance of supplied product for floor cleaning.
311 1 To evaluate supplied product for DfE listing.
312 1 To evaluate supplied product for GS 37 certification
314 1 To have products tested for Green Seal GS 34 standard.
318 1 To evaluate supplied product for DfE program.
319 1 To evaluate supplied products for hand washing following Green Seal GS 41.
321 1 To evaluate new aerosol cleaning line against other similar products
325 1 Conduct performance evaluation for GS 37 for 2 products plus a conventional product for all purpose cleaning. Perform cleaning evaluation for GS for two products plus a conventional product for bathroom cleaning.
327 1 To perform cleaning efficiency test for Green Seal or EcoLogo certification
328 1 We need to find a replacement anionic surfactant for Dowfax 2A1 that complies with Greenseal restrictions for GS-37
330 1 To evaluate potential cleaning ability of two solvents
333 1 Perform an evaluation of the supplied products to screen for effective cleaning formulations.
334 1 To evaluate testing prerformance of product line. Also provide assistance in MSDS and label information.
337 1 Performance testing for floor stripper for Ecologo certification
338 1 Perform evaluation for 5 products for ASTM D4488, 5 for TURI All Purpose soil and 7 products for CSPA DCC-09 methodology. Want to compare results to existing products.
339 1 We are focused on the need for demonstrating its parity and/or superior performance as an all- purpose hard surface cleaner, a degreaser, and an odor neutralizer, where name brands tested also for establishing relative performance benchmarks.
344 1 To evaluate two samples, one is an all-purpose green cleaner and the other is a green degreaser that turns the grease into soap. The second one will be used to treat grease traps and plumbing in restaurants.
345 1 We’re considering submitting the following Green Works Concentrates products for testing. What would be the cost to submit them?
346 1 To provide technical assistance for product development and performance testing.
346 2 Quality control of disinfecting quat based products
348 1 To conduct performance testing for DfE recognition for all purpose, bathroom and glass cleaners
348 2 We are now in the final stages of our DfE product approval. Our products had to be reformulated in order to pass DfE regulations. With these revisions, we need to have product performance testing done again with the new formulas. Is your laboratory still able to perform this for us?
349 1 To evaluate supplied product for DfE performance testing
350 1 To evaluate the peformance of cleaning product for EPA DfE recognition
351 1 To evaluate supplied products for either Green Seal or EPA-DFE certification for performance.
352 1 At the point in formulation stage where I feel confident the products are performing well at their stated task, but a third party testing service would helpful in quantifying the actual cleaning performance.
352 2 To evaluate products for various household cleaning applications. All purpose, glass, bathroom and hand soap
353 1 We request a quote for the following degreaser testing: 1. Efficacy: Compare our formulation at 5%, 10%, and 20% (ie, 50,000; 100,000; and, 200,000 ppm). Does a 5% solution work well enough, compared with 10%? Any additional benefit from the 20% form
355 1 Would like to have testing done for EPA DfE recognition program. Need to have all purpose, heavy duty degreasing, glass cleaning and Pet Stain & Odor removal products.
355 2 To test the disinfection efficacy of Eco Green Heavy Duty Degreaser
356 1 We are interested in pursuing product performance testing for a new DfE based All Purpose Cleaner (industrial cleaner/degreaser for janitorial type cleaning) that we have developed. We are interested in receiving a quotation from you for product performance testing that meets the requirements of the DfE standard. I would be interested in receiving information on costs, testing times, and requirements to perform the testing (i.e. how much chemical is required). It would also be nice to have a general understanding of the testing you would perform so that we might try to duplicate it in-house prior to submission to confirm/ensure success.
357 1 We are most concerned with the cleaning efficacy test right now. We have tried a few different methods to compare cleaning efficacy with use of a parts washing brush, but they did not show clear differentiation between fluids (even between solvent and water based) and had a high standard deviation between runs with the same fluids. Products to be included: Bio-Circle ULTRA at 105F, Bio-Circle L at 105F, Bio-Circle Aero at 105F, Bio-Circle CB100, Bio-Circle CB100-ALU, Bio-Circle UNO SF, ChemFree SW4 at 105F, Simple Green Industrial, Graymills Aquatene 330 and LPS T91. Please let us know if you already have GS 34 test data for any of these products. I have been told you have test data for Keteca Heavy Duty Degreaser, and I would like that included in the report for comparison.
358 1 Determine the potential for potentially harmful bacteria to contaminate and survive in soap and soap dispensers.
359 1 We have a carpet aerosol foam product that needs to be done. Looking to compare our product against Resolve for stain removal, carpet cleaning and odor elmination efforts. Need to address concerns from licensor.
359 10 Fetch 4 Pets odor testing.
359 11 To evaluate supplied products for odor elimination
359 12 To conduct CSPA DCC 18 Neat Dish Washing evaluation for two products
359 13 Carpet stain removal
359 14 To evaluate glass and surface cleaners.
359 15 Testing grill and oven cleaners for efficacy.
359 16 Evaluate cleaners for effectiveness in removing stains on carpet.
359 17 Evaluate odor eliminating carpet cleaners
359 18 Odor test on clothing.
359 19 Conduct a longevity test of in-wash and dryer sheets for fragrance following as closely as possible to the provided methodology. Three separate sets of towels are conditioned using the product as directed. After washing and drying, the towels are folded and stored for the allotted time. The towel conditions are evaluated in separate phases (Wet, after five days, and after 14 days). After washing and drying, the towels are folded and stored by product in drawers for the allotted time. At each phase six (6) panel members judge the towels fragrance strength. Each panelist will rate the towels for fragrance, using the following criteria: None = 0, Slight = 1, Moderate = 2, Strong = 3. The numbers are tabulated and scored based on the panelist rating.
359 2 I have a hand soap program shipping to target the 1st week of July. I need to do efficacy testing/performance testing on this. Testing is for DfE performance.
359 3 We will send you 10 oz of 3 different options of our dish soaps. I want to test all 3 of these against the following brands. Dawn Dawn Platinum Palmolive Palmolive oxy Ajax
359 4 I left you a voicemail on this subject and I am sending this email to inform you that I have two samples inbound to your lab for competitive testing: 1. SHOUT Urine Destroyer; 2. SHOUT Carpet & Odor. These samples will need to be tested against that currentproduct in the market place as well as Resolve. I am hoping you have these items available in your catalog to help expedite the testing. Once I have the tracking info I will forward to you. Can you confirm that your team can expedite this testing and if so when can results be available?
359 5 We would like to test 3 samples out for the following applications: 1. Furniture polish can you test this against the following against, Behold, Endust, Pledge furniture 2. Fume free oven and grill cleaner against Easy off fume free 3. Aerosol glass cleaneragainst Windex aerosol and Sprayway aerosol How much would this cost? What is the lead time?
359 6 We’d like to request an additional test of the Fume Free PLZ formulation against the EasyOff Fume Free. Could we do the same test method and same number of trials and get these back quickly? We’re hoping to prevent the need to reformulate the product but are looking for more data points.
359 7 I wanted to talk costs for some upcoming testing headed your way. Could I get your help in acquiring a quote for the following: Laundry test against 2 competitors
359 8 Attached is the test request for these new samples. Out of the 3 tests in the Brand Buzz queue, could we prioritize by the following: 1. Hand soap test (request attached) o Two samples to test are both included in the box shipped today
359 9 I’m also going to be sending some more samples. Soft abrasives o Powder vs. comet and ajax o Gel vs. soft scrub o Liquid cream vs. soft scrub
361 1 I have put together two documents about the testing we require. The efficacy testing is very straightforward however it is the enzyme testing that seems to be something that most labs do not do. Can you carry out this test, and can you give me an approximate cost? Testing Requirements for Cleaning Products to Meet the GS-37 Standard: All Purpose, Carpet, Glass and Enzyme tests.
362 1 Per the project request, we would like to evaluate the outputs from our EAW system (Hydris) under the following TURI Performance Test Standards: All-Purpose Light Duty (2); Hydris Disinfectant Cleaner , Hydris Sanitizer Cleaner & Glass Cleaner; Bathroom General (1); Hydris Disinfectant Cleaner; Flooring and Washable Walls (1)Hydris Floor Cleaner Glass Cleaning (1) Hydris Sanitizer Cleaner & Glass Cleaner Carpet Cleaning and Resoiling (1) Hydris Floor Cleaner
363 1 We would like to get an estimate/proposal on getting TURI’s help in defining a protocol for removal of carbonized oil/fat on metal to help us validate the performance of our newer degreaser line that is no PPE, VOC carb compliant. We don’t go after any certifications, so this is really targeting method development and evaluation of our new vs. old vs. standard degreaser products to help validate our development as well as market when we go to launch.
364 1 The two products sent to you have are our E40 Odor and Stain Eliminator and E50 Deodorizing Cleaner. We will need UL 2796 Standard for Sustainability for Odor Control Products. The Deodorizing cleaner is technically being certified in the Hard surface Cleaning category, so I’m not certain if we need the hard surface efficacy testing (as it was done previously by our manufacturer Novozymes), but I am confirming with our auditor as I mentioned.
364 2 The product E50 Deodorizing Cleaner will need UL 2796 Standard for Sustainability for Odor Control Products and GS 37 testing for all purpose cleaning.
365 1 We are interested in Spray and Wipe Food Degreasing to be evaluated via modified DCC-17 Methodology. Looking at evaluating 8-10 products using ceramic tiles and the DCC 17 soil mixture of 33% vegetable shortening, 33% lard, 33% vegetable oil and 1% carbon lampblack. We would like to have visual rankings and possibly photographs in addition to the quantitative method. As a possible option, we are interested in evaluating the cleanliness levels at various stages of cleaning.
365 2 DCC 17 INTERVAL soil removal evaluation
367 1 As a general overview on our product system, we have a single concentrated product that is used to clean 95% of the general daily facility cleaning. It is not intended to be a super heavy duty cleaning product, which we feel is over kill in most situations. Please keep that in mind for our requests and beliefs regarding soil load. The product is used at two dilutions; heavy duty which is for heavy soils and sanitizing. Light duty, which is used for glass/mirror cleaning, floor cleaning, and general surface wipe down. Residue build up is big part of our value proposition and due to that we really need to develop a testing methodology.
367 10 To test the effectiveness of EnvirOx Storm against Green Works AP.
367 2 We would want the DCC 09 A test for filming and streaking, and we would be adding a third lot.
367 3 We are looking to have a test performed on a few samples of chemical, and I was wondering if you guys would be able to help us out. It should be a really simple one, but it might take some time to run. We are also looking to begin this test as soon as possible.
367 4 We will be sending two products both in concentrate to be diluted by TURI using DI water. The breakdown of dilutions and tests is below. Should either product fail its respective tests, we will want to send in a new formulation for that product as soon as humanly possible. We would then rerun that entire series of tests. If you could send me a rough estimate for the tests listed below, I will send the products out this week. If the stainless-steel test is separate from glass/mirror, just let me know and include it in the quoted price.
367 5 Below are the tests we are looking to perform for GS-37. I am hoping to have these sent out today. What kinds of rush options are available here, if any? All purpose for 3 products/dilution. Restroom for 4 products/dilution. Glass for 3 products/dilution and floor for 5 products/dilution. H2O2 Orange Tile & Grout Renovator 1:12.8 (10oz/gal) General Purpose, Restroom 1:256 (0.5 oz/gal) Glass/Mirror/Stainless Steel, Floors H2O2 Orange Tile & Grout Renovator Hyper-Concentrate 1:25.6 (5oz/gal) General Purpose, Restroom 1:512 (0.25 oz/gal) Floors, Glass/Mirror/Stainless Steel Neutral Floor Cleaner Hyper-Concentrate 1: 25.6 (5 oz/gal) Restroom 1:256 (0.5oz/gal) Floors 1:512 (0.25 oz/gal) Floors Multi-Purpose Cleaner Hyper-Concentrate 1: 25.6 (5 oz/gal) General Purpose, Restroom 1:256 (0.5 oz/gal) Glass/Mirror/Stainless Steel, Floors
367 6 Here is the next round of testing. One or two tests may be added or taken off, but for the sake of generating a PO and getting these out today, this is pretty much the bulk of it. Again, if your lab is able to take rush requests at this time, we will pay for that as well. Please replace chrome with stainless steel in the glass/chrome/mirror test, and please also replace Hucker’s soil with the DCC 17 grease soil mix.
367 7 To evaluate supplied products for all purpose and bathroom cleaning applications
367 8 To compare 6 product formulations for bathroom cleaning
367 9 To evaluate supplied products for bathroom cleaning
368 1 Tropical Products in Salem, MA has been approved by Stepan as a second source to manufacture/fill Enviro Care Corp Moldex RTU and Concentrate disinfectants. I would need a support proposal and cost for probably ca. three 2hr visits. My anticipation (and I will confirm) that additional support visits from you will be taken care of by Tropical. They have also indicated that they would like to retain you and your lab capability for other project support also.
368 2 Conduct a cleaning performance evaluation on our product as compared to 2 supplied products. Looking to compare dirt, grease, crayon/wax and food stain (mustard) removal from a metal surface using minimal mechanical agitation.
368 3 EnviroCare Moldex Paint Prep, Evaluate versus: Motsenbocker’s Lift Off All Surface Paint Prep, Savogran Liquid TSP Substitute. We can discuss if you can detect any gloss reduction or paint adhesion performance.
369 1 Conduct performance testing for odor elimination, carpet cleaner and all-purpose testing 1. ABF Formula RS040715A-1 (RS3-224) Long Lasting Odor Eliminator w/Oxy; challenge against current Shout product in market (Shout Pets Turbo Oxy Time-Release) 2. ABF Formula RS040715A-1 (RS3-224) Long Lasting Odor Eliminator w/Oxy; challenge against current Shout product in market (Shout Pets Turbo Oxy Time-Release) 3. ABF Formula RS090914C-1 (HS5-198) Carpet Cleaner w/Oxy Gel; challenge against current Shout formula in market.
369 2 To evaluate odor elimination for supplied products
369 3 To evaluate supplied products for malodor elimination.
371 1 We are looking to have our product line tested for green certification requirements. We will need glass, all purpose (may be 2 formulas), bathroom/tile and driveway oil degreasing. We want to compare to a conventional and green product lines. We would lik
372 1 We’re considering submitting the following Green Works Concentrates products for testing. What would be the cost to submit them? Green Works General Purpose Concentrate Cleaner Green Works Bathroom Cleaner Concentrate Green Works Neutral Floor Cleaner Co
375 1 We are looking to have product tested for GS 51 certification. Product to be compared with 1 industry comparative product. Please provide option for adding additional products to the testing plan.
376 1 Provide formulations for 8 products and ask TURI to review for greenness and efficacy.
377 1 Looking to have metal finishing testing completed with Solvon K4 that we are using for dry cleaning. Looking to have 1 product tested with several substrates, wide range of soils and a few processes.
377 2 Provide an EHS review on solvent and compare to traditional halogenated solvents.
378 1 Please send me information about your test according to (modified) ASTM D5343. I am sending you two samples for ASTM D5343 test. They are being sent in the concentrate and will need to be diluted to 2% solution. Please send quote.
378 2 Please send me information about your test according to (modified) ASTM D5343. I am sending you two samples for ASTM D5343 test. They are being sent in the concentrate and will need to be diluted to 2% solution. Please send quote.
381 1 We are a manufacturing company that make industrial and institutional cleaning chemicals. We have a few that are approved green by either Green Seal, UL/EcoLogo, and/or EPA’s DfE. One of our products is up for renewal and we have to have it third party tested for performance. The product is a bacterial/enzyme that can be used from a carpet spotter to help maintain drain lines. The Standard that it is under is UL/Ecologo – UL27969 (Standard attached). Do you perform any of the test on page 12A? If so, can I get a price quote?
382 1 We have a new formula for our White Pearl Hand Soap that I would like to have performance testing done for our pending Green Seal Certification. Are you still able to do this, and if so, can you send me a quote and where I should send the sample to.
382 2 As discussed over the telephone, we have a product we are trying to re-certify with ULE (EcoLogo). It is presently under the CCD-115 standard, and we have to re-cert under CCD-107 standard for biologically based odor control products. Please let me know
382 3 I'd like to get a floor finish stripper performance tested according to Green Seal's GS-40 standard. Could you give me a quote?
384 1 I'd like to have one of my products tested, particularly against a currently available commercial product SimpleGreen(r). I've filled out your form and attached it. Please review it and let me know when I can submit my samples. We would like to test attwo dilutions - 10:1 and full strength. Can the results be compared to previous tests you have completed on other products?
385 1 I was referred to you by Ms Erica Harriman from ToxServices. A couple years ago our company created a household all-purpose cleaner and we are now interested in EPA's DfE program certification. Could you please help me with the following info: - Which tests must be performed for an All-Purpose Cleaner (ex. ASTM G122 or ASTM 4488, ASTM E502, ect...) - Quotation with cost and estimated duration of the testing at TURI's labs
385 2 We are interested in testing our floor cleaner using the ASTM4488 A-2 standard. Would you mind sending me a quote for this test?
386 1 I’m working on ecologo certification CCD 115 (UL 2796). My product is detergent based on benefic bacteria , surfactant and perfume In this category, we have to evaluate the efficacy of a product desodorization can by E1593 or E679. Have you expertise for
386 2 Characterization of microbial activity by measuring protein reduction over time by Bradford assay using Pollet's Bacillus subtilis strain and BSA fraction V as the protein.
388 1 I have the following products I would like to test to start with: Glass cleaner efficacy including filming and streaking. It looks like this would be tests GS 37 and DCC 09A. Two different strengths (same ingredients but different concentrations) will be sent. Antimicrobial as an all-purpose cleaner - Test GS 37. I can send product ready-to-use for two dilutions. General purpose cleaner/degreaser for grease removal from hard surfaces. Test DCC17. I can send product ready-to-use for three dilutions.
388 2 I have some more products that I would like to test. Can you please let me know the recommended tests and how much product you will need for each test. 1) Carpet/rug cleaner- this is going to be the same product that you tested for us as a cleaner/degreaser and we want to test it at 1:64 and 1:128 dilutions (i.e., we can provide concentrate or ready-to-use). I'm not sure if the test also includes spot treatment or not- for spot treatment, we would probably use a different dilution (e.g., 1:4 or 1:16). 2) Manual hand dish soap 3) Window/glass cleaner- you tested two different formulations for us already and this is a new version
388 3 I noticed that you do automatic dishwashing assessment too. I would like to test one of our products in that test too using two dilution.
388 4 To evaluate five products at multiple dilutions for all purpose cleaning and compared to an industry standard product
388 5 To evaluate all purpose cleaning efficacy of 11 test samples and 1 comparator sample.
389 1 To conduct performance testing on Kitchen and toliet bowl cleaner.
390 1 I came across your website while searching for a lab which could help our company with product testing. Our company Pure Care Home was launched with the purpose of creating a new brand of natural, safe, non-toxic and effective household cleaners infused infused with essential oils. With the help of one of the leading manufactures in Texas we’ve developed our product line of cleaning products that currently includes all-purpose cleaner, bathroom cleaner, glass cleaner, and dish soap. We did our first trial run in May this year. Our goal is provide our customers with safer but effective alternatives to harsh cleaners widely available on the market today. In order to get a better understanding of how effective our products are and how we can improve, we would like to perform a testing. I would highly appreciate it if you could let me know what your testing procedure is, how long it takes, and pricing. We are looking forward to working with you.
391 1 PURETi Group LLC is an American manufacturer of aqueous photocatalytic surface treatments - water and titania solutions that are spray applied to materials of all types to safely, invisibly and durably transform the treated surfaces into self-cleaning air purifier - when exposed to light. We are seeking to have our newest product, "PURETi Clean & Fresh - the glass cleaner that also cleans the air", tested for its: glass cleaning ability; sustained glass cleaning ability over time in the presence of light; TVOC reducing ability over time in the presence of light. PURETi Clean & Fresh is a DIY, spray and wipe glass cleaner.
393 1 To whom this may concern regarding re-certification of UL2796 products. I am sending three products of Qwatro RoyalPak for re-certification under UL 2796. Please use the standards of testing set out in the guideline and forward the information back to Qwatro RoyalPak
394 1 I was provided your contact information by Ms. Erica Harriman at ToxServices; we are working with ToxServices to qualify a cleaner product for the EPA Safer Choice Program. In line with the Performance Standards of Section 4.2.1 of the Safer Choice Program, our product (a fluid intended to be used to remove residue from markers on whiteboard surfaces) would not fit under the parameters of any listed subpart in this section. ToxServices has received recommendation from Safer Choice “that the product be tested against a few nationally recognized products for effectiveness of whiteboard cleaning, since they (Safer Choice) are not aware of any standard testing procedures for whiteboard cleaners.” As such, ToxServices has recommended that we contact you for a quote on services for creating and applying test procedure applicable to our product type/usage. Would you please be able to provide a quote for services on this testing project? Thanks in advance!
401 1 interested in having you rate our product's effectiveness and how well it performs relative to other products you already recommend.
402 1 Final Report-To find replacement for MEK
403 1 Looking for someone who could run ASTM G122-96 tests. I need to have the test ran as part of DfE’s Safer Choice Standard. If you can runt the test please quote me on the cost and required material. Supposedly I can run the in our own lab, but I would rather have it run at an independent facility because I feel that appears more credible.
409 1 To conduct all purpose testing for EPA Safer Choice Program
410 1 Interested in having several of our all-purpose cleaner products tested (in order to find the best formulation for it). If you do offer the service, what are the testing fee, protocol and lead time for the results?
413 1 To evaluate supplied product for cleaning performance.
416 1 To evaulate products for all purpose and industrial cleaning peformance
416 2 To evaluate supplied products for hand washing testing.
416 3 To conduct performance testing for automatic and manual dish washing soaps
416 4 To evaluate the effectiveness of body wash and face wash cleaners on removing GS41 from skin.
417 1 We are currently undergoing a product review for two products we have certified with Eco Logo/UL as bacteria based odor control products and we are in need of more current product performance testing. Teresa Matsell with International Enviro Auditing pointed me in your direction as a lab that may be able to do this testing for us. The standard they would fall under is UL 2796, which points out the testing needed would be ASTM E1593 or E679 and it would have to be performed against two competitive products. Is this something that your lab can do?
423 1 To evaluate grease oil and varnish removal of supplied products
424 1 One of our customers has asked us to evaluate the cleaning ability of a hand/body wash prototype against a commercial sample.
431 1 I have a client interested in ASTM E1593 Assessing the Efficacy of Air Care Products and I see from your website that your lab has capabilities. We have just one product for testing.
433 1 Looking for a company to do a comparison for a Toliet Bowl Cleaner vs the National Brand. Is this something you do
440 1 We are interested in conducting performance testing for our cleaning product as an All-Purpose Cleaner in line with GS 37. Does the price quoted in the Lab Basic Testing fees include P2OASys? If not, what would be the additional cost? I am not sure what we would compare it to, to be honest; this will be the first official performance test we conduct for our products and we are hoping to use it to pursue Green Seal certification. Cleaning Product 1 Source: Vapor Condensate for All purpose, Glass, S.S. polishing/cleaning Cleaning Product 2 Source: Vapor Condensate (Diluted) for All Purpose Cleaning Product 3 Source: Distilled Broth for All purpose Compare EHS for Product 1 and 3.
442 1 To test the effectiveness of k-cup descaling of supplied product as compared with industry competitor. We are looking into Green Seal certification. Need to have marble block test performed.
442 2 To evaluate supplied cleaning product against water and comparative products for long term build up removal.
445 1 To evaluate the effectiveness of formulations in the removal of soils on various surfaces.
447 1 I am interested in getting a quote for product performance testing that we need completed by a third-party lab for Green Seal testing and certification. We have several products that require testing. I have included the corresponding ASTM method number and performance criteria and the applicable Green Seal Standard. The Wood Cleaner and Floor Cleaner don’t seem to match up to a specific test method so we can either use the method I proposed on the spreadsheet OR use one that you suggest as a “best fit”. We would like to have the products tested as soon as possible and hope that you can provide the following to us this week. •Price quotation for the required testing (for the products listed on the attached spreadsheet) •Timeline for testing and reporting •Process for submitting product test samples and how much is needed to run the tests.
448 1 We are looking to evaluate our products for oil and grease removal using the ASTM G122 method. The GS 34 most closely matches what G122 was designed to test for. It prescribes two soil types that match up with the machine/motor oil.
449 1 I am looking to get my housed hold all purpose cleaning product performance tested. It is for a green Seal approval that is required by one of our vendors. The standard it needs to be tested to is the ASTM D4488, removal of 80% of soil from surface. Is this something your company can do? If so How much does the testing cost and how long will it take? Please let me know.
450 1 Please note that I received your contact information from Erica Harriman at ToxServices. I am currently working in a start-up, namely Cleanyst, that is planning to launch in a few months. In summary, we have developed a revolutionary system that harnesses innovations in plant-based chemistry and sustainable packaging. The system features an easy-to-use appliance, beautiful reusable bottles and concentrated, plant-based ingredients that are shipped directly to your door in minimal packaging. We would like to get Safer Choice approvals for the following products: All Purpose Cleaner, Glass Cleaner, Tub + Tile Cleaner, Dish Soap, Laundry Detergent, Fabric Softener, Hand Soap
451 1 To compile third party testing of our product for basic cleaning operations and disinfection testing.
459 1 We’d like to make the claims that it “cleans, polishes and protects” surfaces. HSN have specified the following: “Please provide Product Efficacy Analytical Testing from a qualified testing laboratory based on ASTM recognized test methods such as: ASTM G122 Standard Test Method for Evaluating the Effectiveness of Cleaning Agents”. GS 37 – All Purpose GS 37 – Glass Cleaning GS 37 – Bathroom General DCC12 – Screening the Efficacy of Oven Cleaners ASTM D5343 – Evaluating cleaning performance of ceramic tile cleaners Stainless steel cleaning/polishing
461 1 We have thee formulas we are launching to market which we would like to benchmark : · Multi-purpose 99.99% kills claim (sanitizer, disinfectant, cleaner) which is newly EPA registered (all 50 states) – approved by the EPA as a one-step cleaner sanitizer against a 5% load o We will share our soil removal info from the EPA approvals and discuss with you what if anything we would like to further test here (allergy, asthma, etc.) · Cleaner Degreaser (non-EPA) o We want to compare to: Simple Green, Method Cleaner, GreenWorks, Seventh Generation, ECOS (or others you would suggest) · Pet Stain & Odor Remover o We want to compare to: Nature’s Miracle, Resolve Pet, OUT! Pet and Shout Pet If you could please reach out to Pollis who is leading the technical testing from our end to discuss the timing, budget and other factors of this project, We would appreciate it!
462 1 Performance testing of supplied floor cleaning product
463 1 To evaluate the effectiveness of an all purpose cleaner and a dish soap to comparative products.
466 1 Here's is what the Safer Choice folks are looking for in the way of testing to show dirt removal: While we don’t have a formal test method to recommend for this product type, we would want to see the following elements: Compare product’s performance against water as a control. Report quantitative rather than qualitative (e.g., visual examination of the produce after product use) results. Address any performance claims made on the label, or that you would like to add to the label (e.g., removal of waxes, pesticides, dirt, oil, etc.). Methods should mirror product use instructions and any materials/residues used in the test should be representative of materials/residues customers would expect to encounter. Results should demonstrate >80% cleaning efficacy. We would be happy to work with you to review proposed methods before the test is conducted.
477 1 To test the disinfection efficacy of NCIR Sanitizing Water Professional Strength (3 pH) and Extra Strength (2.5 pH) products on MS2 bacteriophage and Staphylococcus aureus.
478 1 Looking to see if you can give an itemized quote with lead time on: 1. CaCO3 binding capacity for a chelator (two samples) 2. Using chelator in a formulation, all-purpose cleaning (two samples) to check cleaning performance 3. Using chelator in a formulation, automatic dish cleaning (two samples) to check cleaning performance 4. Using chelator in a formulation, laundry cleaning (two samples) to check cleaning performance Do you have in-house generic formula for those applications?
478 2 To evaluate supplied chelating agent against other alternatives. Test by itself and in formulations for all purpose and laundry.
479 1 We are looking to have products tested at the most dilute (least concentrated) version of the product as recommended to users. The test should demonstrate the efficacy of the product for the specific use (i.e., device cleaner, solar panel cleaner, degreaser, etc.) against the soil type that would normally be found for that cleaner. The results should be quantitative and demonstrate an 80% cleaning efficacy or that the product performs as well or better than nationally recognized comparable products. We have 3 products that we are working towards the Safer Choice designation. 1. Solar panel and Window Cleaner 2. Device Cleaner 3. Industrial Strength Cleaner Degreaser – this one is concentrated, and from what Erica has said we need to test at the lowest concentration level as a Ready to Use product. In this case we will dilute it to 14:1
480 1 I have outlined our end use for our cleaner. If I could see some example reports of this it would be greatly appreciated. If I remember correctly these are also comparative testing in which it is compared to a nationally recognized brand? I’d also be very interested in what 3-5 tests you’d recommend doing first and then expanding out from there. 1. General Purpose Cleaner 2. Glass Cleaner 3. Bathroom General 4. Automatic Dishwashing 5. Ware washing by hand (3 basin) 6. Cleaning resilient floor and washable walls 7. Odor Removal 8. Oil Cleaning light (cooking) 9. Whiteboard Cleaning 10. Stainless Steel Cleaning 11. Carpet cleaning – general 12. Carpet stain removing 13. Laundry Testing 14. Fruit/Veggie wash 15. Antimicrobial testing on fruit/veggies including shelf life study 16. Toxicity discussion and ranking
480 2 To remove soil from the substrate.
480 3 To test the removal of DCC17 from ceramic wood and vinyl.
480 4 To test the removal quality of pathosans cleaner compared to another product.
480 5 My company has done product testing with TURI in the past (Tyler Williams would have been your contact), and we would like to basically recreate that previous testing with a new product of ours. To my knowledge, this would involve all-purpose, bathroom, carpet, glass, odor, and floor cleaning tests. Would you be able to give an estimate for what this project would cost?
482 1 To determine the efficiency of SAAFH Device Cleaner in the removal of carpet soil from various substrates
482 2 The objective of this test is to evaluate the supplied cleaners and their effectiveness on removing the AATCC soil.
493 1 The main objective is to stability-test our current line of chemicals under heat and humidity stress, ensuring that the chemicals in their current packaging are stable against adverse conditions (e.g. riding in a semi-trailer in southern states during the summer months) without leaking or bloating.
503 1 To test the effectiveness of an RV & Marine Tank Treatment cleaner and septic cleaner against a competitor brand to reduce sludge, degrade 2-ply toilet paper, and evaluate malodor reduction over the span of 10 days.
508 1 Testing the efficacy of GreenOx Renewal compared with a market alternative on restoring the look of aged wood siding.
509 1 Comparative testing of Green Ox Renew product for restoring grey oxidized wood.
513 1 To conduct performance testing for antimicrobial, all purpose, glass, dish washing, hand washing, floor and grease removal products
513 1 Conduct performance evaluations for antimicrobial, all purpose, floor, grease, dishwashing, glass cleaning and hand washing products.
513 2 To test company products against comparative market products.
516 1 Interested in having product testing for boat/bilge cleaning and other related soils and surfaces. Would like to include two comparative products. Potential interested in product formulation assistance.
516 2 To test the efficacy of the GeoProX on biofouling in applications relating to boat hull cleaning and bilge tank cleaning.
517 1
520 1 Benchmark testing for Craft Beverage project
520 2 Safer Choice Performance Testing: Grease Cleaning: DCC-17, Calcium Removal: Marble Block Test, and Cleaning Microbial Reduction: Hard Surface Use-Dilution Performance Testing
526 1 We would like to do two products for now and we will add as needed in the future. We will do one for All Purpose and one for Grease removal from hard surface.
527 1 To test the efficacy of a luandry detergent in removing various stains from cotton and polyester at room temperature and 86F +/- 5F